Cool It: Easy Ways to Troubleshoot Common Walk-In Cooler Problems
Like any other appliance, a walk-in cooler sometimes malfunctions as a result of loose wiring and old parts. The following are some common problems with walk-in coolers and how to troubleshoot them.
Cooler Is Freezing
If the walk-in cooler is freezing up, the first step is to melt ice off the evaporator, and then check that the evaporation fan is running and rotating correctly. Next, check for a clean coil and clear drain line. Also, check all gauges to be sure temperatures, subcooling, superheat, and pressures are all normal. If none of these steps solve the freezing problem, consult the owner’s manual or contact a repair technician. If only the first section of the evaporator is freezing, the problem may be a low charge or a restricted liquid line, drier, or metering device.
Unit Won’t Maintain Temperature
If the unit is cooling but won’t maintain the appropriate temperature, it may be a problem with the parts. First, check that the temperatures, subcooling, superheat, and operating pressures are all normal. Check that the door’s gaskets are sealing properly; if not, cold air could be escaping. Next, check the temperature control. If it’s turned to the coldest setting but turns the compressor off too early, it needs to be replaced. If that still doesn’t help, make sure all coils, panels, and grills are clean and properly functioning before calling a repair technician.
Unit Is Dead
As with any appliance that’s nonfunctional, the first step is to check that it’s plugged in, and the on/off switch is in the proper position. Or, if the unit is wired to a disconnect, verify that the disconnect has power. If there appears to be an electrical problem, we recommend contacting an electrician. If the plug or disconnect has power, it’s possible that there could still be a problem with the connections on either end; the next step is to check for broken or loose wires in both the plug or disconnect and the unit itself. Also, check for problems in the wiring of the ground and neutral. This can be done with the use of a non-contact voltage detector.
If these steps don’t indicate the problem, or there is some problem not listed here, call a repair technician to investigate.
Photo Credit: Ben Tsai
Related posts
“By failing to prepare, you are preparing to fail” – Benjamin Franklin Whether you are a new business owner or have owned your business for years, you know planning is pivotal to success. Over 90% of startups fail for various reasons, with bad preparation and planning often playing a large part in these failures.
The only time that an insulated floor is not required in a walk-in cooler is when it is located on cement, at ground level, with no rooms directly underneath it. In other words, most walk-in coolers and freezers need to be insulated! There are a variety of strategies and materials to assure quality work, so
End caps and aisle-ends are an important promotional location inside a retail store. Estimates of the sales effectiveness for items placed in these locations may be as high as 30 percent of all sales, so it’s clear that this is an important retail space inside a store. When stocking a beer cooler with alcoholic and
Contact American Cooler Technologies
Call American Cooler Technologies today at 269-674-8144 for more details and to receive a no-obligation, hassle-free quote for a walk-in cooler for your business.